2G Network Shutdown in Australia

Posted by: Mubashir Chaudhry Comments: 0 0 Post Date: 08/11/2016

Australia is Shutting Down 2G Network

Following Telstra and Optus, Vodafone has finally announced the closure of its 2G network in September next year.

VODAFONE

Vodafone Australia has finally announced the shuttering of its 2G network, with the service to be switched off on September 30, 2017.

According to Vodafone, its 2G network carries less than 1 percent of its total data traffic and 2 percent of its voice traffic, while its 4G network already carries almost 80 percent of data.

The freed-up spectrum from shutting down the 2G network will be repurposed to augment and extend its 4G network and roll out new services, Vodafone said.

“With the Internet of Things (IoT) on our doorstep, it is paramount we manage spectrum efficiently and reallocate capacity to our more advanced networks to help more of our customers have a better experience.” said Vodafone acting CTO Kevin Millroy.

Vodafone’s 4G network covers 95.3 percent of the Australian population, which is almost 23 million people. The telco has increased the size of its network by 40 percent over the past four years. Vodafone also announced in May that it will spend AU$9 million on constructing 32 new mobile base stations in regional areas.

Furthermore, Vodafone is expanding its 4G network by purchasing AU$68 million worth of 1800MHz spectrum earlier this year. Vodafone is also reframing its 850MHz spectrum band to bring coverage to regional and metropolitan Queensland, New South Wales, and the Australian Capital Territory and proposing to the Australian government that it be permitted to pay AU$594.3 million for 2x 10MHz in the 700MHz spectrum band that was unsold in the 2013 auction.

OPTUS

On 5th of August 2015, Optus announced that it will shut down its 2G GSM network from 1st of April 2017 as consumers increasingly use more data.

“Greater smartphone usage and advances in 4G technology are driving customer preferences for more mobile data and faster speeds, and there has been a steady decline in 2G traffic and customers in the last few years,” said Dennis Wong, acting managing director for Optus Networks.

“2G now constitutes a fraction of our total mobile network traffic, and is declining significantly year on year. Mobile service providers globally, including in Australia and our parent company Singtel in Singapore, are closing down 2G networks to support newer technologies.”

Singtel, along with fellow Singapore telecommunication providers StarHub and M1, announced in June that they would cease offering 2G services by April 2017.

“Today, the majority of mobile customers are on 3G and 4G networks; only an extremely small percentage of customers remain on 2G-only mobile devices,” Singapore’s three telecommunication providers said in a joint statement.

In a statement published on their website, Optus said that 2G network shutdown will provide more options to re-allocate some of 2G spectrum to improve customer experience and mobile services.

TELSTRA

Telstra was the first one in Australia to announce the shuttering of its 2G network. Telstra announced that it will close the 2G (GSM) network by the end of 2016 via blog post by Telstra’s Group Managing Directors of networks Mike Wright in late July 2014.

“Ever since we launched our world leading NextG network in 2006 we have seen customers progressively move off the 2G network,” he said.

“We have seen steep declines in the number of customers on 2G to the point where today 2G traffic accounts for less than 1 per cent of our total network traffic [and] we have not sold a 2G phone for several years,” Wright said.

Once the migration is completed, it is expected Telstra will refarm the 2G spectrum for use with 4G technology.


What are your upgrade options?

Whether you need a replacement of your 2G serial modem or Ethernet router Intercel has you covered.

All Intercel 3G serial modems are CSD (Circuit Switched Data) capable to support the old systems which are not able to use PSD (Packet Switched Data). Intercel 3G modems are physically compatible with earlier 2G modems and upgraded software allows seamless transition when updating from 2G to 3G in the field. Intercel 3G serial modems with  CSD capability is a simple solution for systems that are not capable to use PSD and could save your company from the hassle and fortune you will spend to upgrade the entire system.

  • Smart SAM3T

    The Smart SAM3T is a UMTS based modem. It provides EDGE, GSM, GPRS, WCDMA and HSPA+ connectivity. This modem is based on the Qualcomm MDM6200A baseband processor, and designed for Machine-to-Machine applications. This modem does not have an integral antenna.

    Depending on customers’ requests, the Smart SAM3T modem may/may not be supplied with an antenna. In the case of customers wanting to acquire the antennas themselves, the antenna specification is included in the User Guide. A typical application will require the Smart SAM3T be connected to an external five-band 850/900/1800/1900/2100MHz antenna as described in the User Guide.

    Based on the standards EN50385 and EN50383, a minimum safety operating distance has been calculated and stated in the User Guide.

    From: $374.00
  • Smart SAM3S Serial

    The Smart SAM3S is a standalone industrial HSPA+ 3G modem that sends/ receives data over the 3G/2G mobile network.

    It is the exact same form factor as the popular SAM2G modem which is widely used in metering applications and conveniently is a direct replacement for the SAM2G, when a 3G upgrade is required.

    The Smart SAM3S 3G modem has a high temperature rating and incorporates the Intercel GPRS smart stack for easy transition from Circuit Switched Data to Packet Switched Data.

    The Smart SAM3S’s rugged design makes it ideal for industrial M2M applications such as metering, security, SCADA and industrial monitoring.

    $374.00$473.00
  • SAM3GPlus USB

    The SAM3GPlus USB is Intercel’s industrial USB 3G modem. It is a 3G modem complementing our range of GSM, GPRS, 3G & 4G modems used for fixed and mobile M2M applications.

    Its rugged design & small form factor make it ideal for industrial applications such as automation, industrial monitoring, security, health and environmental monitoring.

    The SAM3GPlus 3G modem is capable of sending/receiving SMS, Circuit Switched Data and Packet Switch Data enhancing its use in many types of M2M applications.

    $385.00$467.50
  • SAM3GPlus SERIAL

    The SAM3GPlus Serial is Intercel’s industrial 3G modem. It is a 3G modem complementing our range of GSM, GPRS, 3G & 4G modems used for fixed and mobile M2M applications.

    Its rugged design & small form factor make it ideal for industrial applications such as automation, industrial monitoring, security, health and environmental monitoring.

    The SAM3GPlus 3G modem is capable of sending/receiving SMS, Circuit Switched Data and Packet Switch Data enhancing its use in many types of M2M applications.

    $385.00$467.50

Our 2G upgrade is not that simple, we need a customised communication solution.

Intercel is an electronics, communication design and engineering company with extensive experience in designing innovative products. We are pioneer in designing communication solutions for many reputable companies in Australia and overseas.

Contact us to discuss a customised solution for your 2G upgrade.

Share this post