UltraSAM4W Remote SMS Administration

Posted by: Amante Sabangan Comments: 0 0 Post Date: 03/06/2015

The recently developed remote SMS administration feature enables the user to control and manage the UltraSAM4W thru the use of SMS commands. This feature reduce onsite visits and save costs using advanced diagnostics and control via SMS to query status information and settings, execute commands and configure settings.

 

The following are the capabilities of this feature:

  • Advanced Diagnostics and Status Information via SMS

Query status information such as signal strength and other radio parameters (RSSI, RSRP, CSQ), device detail and status, WAN IP address and APN settings, among many others. Example, send the SMS command “Cellstatus” to the UltraSAM4W SIM card number (voice number or data number) and you’ll get the SMS response shown below:

[av_image src=’https://www.intercel.com.au/wp-content/uploads/2015/06/sms1.jpg’ attachment=’4584′ attachment_size=’full’ align=’center’ animation=’no-animation’ styling=” hover=” link=” target=” caption=” font_size=” appearance=” overlay_opacity=’0.4′ overlay_color=’#000000′ overlay_text_color=’#ffffff’][/av_image]

Send the SMS command “GetAPN” and you’ll get the following response:

[av_image src=’https://www.intercel.com.au/wp-content/uploads/2015/06/sms2.jpg’ attachment=’4585′ attachment_size=’full’ align=’center’ animation=’no-animation’ styling=” hover=” link=” target=” caption=” font_size=” appearance=” overlay_opacity=’0.4′ overlay_color=’#000000′ overlay_text_color=’#ffffff’][/av_image]

  • Configure device remotely via SMS

Set parameters such as APN, RF band settings, and many more

  • Execute Device Reset via SMS

 

This feature is available on specific firmware releases (V.0.0.8 and later). Please check with Intercel if you need this feature. Please download the UltraSAM4W User Guide/Manual from our website downloads’ link: https://www.intercel.com.au/product/ultrasam4w/ for more details of the feature and command syntax.

 

Share this post